Johansson Profino 6610 Manual De Usuario página 5

OPERATION
All parameters are set with the rotary push button.
Each function and parameters are shown on 2 digits display and different LED's .
Programming
Enter programming mode
> Make all the necessary connections and connect amplifier to mains.
> Push on the rotary button for more than 3 seconds to enter into programming mode.
3 s.
A T T E N T I O N !
When security code is activated
> Turn the button to display "50"
> Push the button to confirm the code.
Note: the security code "50" is fixed and can not be changed.
(see "Exit programming mode" on page 6):
5
The software version is displayed,
followed by a dot.
is displayed.