2. Important Safety Instructions
2.6 Standard Compliance
This product meets the following safety standards and electromagnetic compatibility (EMC) inspection standards:
• UL 1778
• CSA C22.2 No. 107.3
• FCC Part 15 Class A (EMC)
• GB17626-2 / IEC 61000-4-2 (ESD) Level 4
• GB17626-3 / IEC 61000-4-3 (Radiated Field) Level 3
• GB17626-4 / IEC 61000-4-4 (EFT) Level 4
• GB17626-5 / IEC 61000-4-5 (Surge) Level 4
3. Installation and Wiring
3.1 Important Safety Warning
Read this manual thoroughly before undertaking any installation and wiring. An authorized Tripp Lite engineer must perform the start-
up of the UPS and a completed start-up form must be returned to Tripp Lite in order to activate the SmartOnline SUT warranty. Please
contact your local supplier or intlservice@tripplite.com for further details. To find your local contact, go to
www.tripplite.com/support/contacts and click on 'Service Centers'.
Package Inspection
External
Inspect the UPS exterior packaging. If any damage is observed, immediately contact the dealer from whom the UPS was purchased.
Internal
1. Check the rating label on the top of the UPS cabinet and
make sure the device number and capacity match what
you ordered.
2. Examine if any parts are loose or damaged.
3. The UPS package contains the items listed below. Please
check if any items are missing.
4. If anything is damaged or missing, immediately contact
the dealer from whom the UPS was purchased.
5. If the UPS needs to be returned, carefully repack the
UPS and all of the accessories using the original packing
material that came with the unit.
No.
Item
UPS (with internal batteries)
1
Owner's Manual
2
Test Card
3
RS-232 Cable
4
Notes:
1. The balance supports have been locked on the pallet when the UPS is shipped out of the factory. Keep them well maintained after unpacking, as it may
be necessary to use them for installation.
1
(Male) (Female)
SUT20K
SUT30K
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
6
2
3
4
SUT40K
1 pc.
1 pc.
1 pc.
1 pc.
SUT60K
1 pc.
1 pc.
1 pc.
1 pc.