Triton 2000 Serie Instrucciones De Funcionamiento página 9

Connecting the power
Make sure the switch is "OFF", plug the saw
into the switch box, and bring power to the
switch box via a suitably rated extension cord.
Press the white switch with your finger to
switch the power "ON". Tap the stop plate
with your hand or knee to switch "OFF"
Switch the power on and off and watch the
blade. If it quivers sideways on start-up it's a
sign of a worn arbor in your saw, or excessive
slack in the mountings between the motor and
baseplate.
WARRANTY
To register your guarantee visit our web site at
www.tritontools.com* and enter your details.
Your details will be included on our mailing list
(unless indicated otherwise) for information on
future releases. Details provided will not
be made available to any third party.
PURCHASE RECORD
Date of Purchase:
Model: WCA201
Serial Number: __________________
Retain your receipt as proof of purchase
___ / ___ / ____
(Located on motor label)
If the blade vibrates significantly at full speed
or on slow-down, it's either buckled or not
seated properly on the arbor. Check the
flatness of the blade with a straight edge,
check the fit of any arbor-reducing washers,
and check for resin/sawdust build-up on the
arbor or flange washers.
A slight quiver is generally noticeable on slow-
down in most blades, and shouldn't affect
your cuts.
Triton Precision Power Tools guarantees
to the purchaser of this product that if
any part proves to be defective due to
faulty materials or workmanship within
12 MONTHS from the date of original
purchase, Triton will repair, or at its
discretion replace, the faulty part free of
charge.
This guarantee does not apply to
commercial use nor does it extend to
normal wear and tear or damage as a
result of accident, abuse or misuse.
* Register online within 30 days.
Terms & conditions apply.
This does not affect your statutory rights
Fitting The Triton Saw / Warranty
GB
9