Archos Movement Tag - Archos Smart Home Guía De Usuario

ARCHOS Movement Tag

Description of the Movement tag
Magnet
1
Magnet sensor
2
Magnet sensor indicator
3
Pairing button
4
Pairing indicator
5
Rubber case
6
Sticker
7
7
When you long press
the Pairing button
(5 seconds)
When you do a short
press on the Pairing
button
8
UserGuide_ARCHOS_Smart_Home_Tablet_book.indd 8
Putting into service the Movement tag
Your Movement Tag functions with a Lithium cell CR
24 30 battery.
1. Remove the rubber case of the magnet receiver.
2. Detach the top from the back case.
3. Remove the insulation label "remove before use".
4. Replace the back case.
5. Remove the sticker on the back case to stick the
device to a wall.
6. Remove the sticker on the magnet to stick it
opposite to the magnet position indicator.
LED blinks for 60 seconds
LED blinks for 10 seconds
LED blinks 3 times
LED is ON for 5 seconds
LED blinks fast
The device is in pairing mode and is
trying to connect to a tablet.
The device is already paired but is
disconnected. It tries to connect.
The device is unpaired and disconnected.
The device is paired and connected.
An over-the-air update is occuring.
15/05/2014 16:05:24