Publicidad
Idiomas disponibles
Idiomas disponibles
PWO 1947
distortion of fan body and cause electrical hazards.
• Keep away from curtain, clothing or other something
may affect the fan's working.
• Turn off all switches and pull out power supply plug
when you go out for long time.
• Never use the fan before finishing assembly to avoid any
hurts.
• Disconnect plug when removing guards for cleaning.
OPERATING INSTRUCTIONS
• Step 1: Place the fan on a flat, dry surface.
• Step 2: Make sure the speedbutton is in position "O". Connect the cable to an AC outlet.
• Step 3: the speed is adjusted by turning the controller to the right or left. You can vary the speed
between 1 (low), 2 (medium) and 3 (high).
• Step 4: THE OSCILLATING switch is on the left of the speed control button.
TILT ADJUSTEMENT
To change the tilting angle of the fan head move the fan head to the desired angle.
FAN STORAGE
The fan can be stored for the rest of the year fully assembled. It is important that the place where you store
is a safe, dry place. It is recommended that the original box is used, or at least a box with the appropriate
dimension.
Disposal of old electrical appliances.
The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you
dispose of the appliance, it must be separately collected.
Consumers should contact their local authority or retailer for information concerning the correct disposal of
their old appliance.
8
Publicidad
