Amana MC52200 Serie Manual Del Propietário página 14

PROBLEM
Unit does not come on.
Circuit breaker keeps tripping.
Pad pressed, oven will not Q, blower runs.
Oven timer reading incorrect (wrong).
Q-ing unevenly.
Oven not heating "normally".
Oven display counts down. Blower
operates.
PROBABLE CAUSE
Power cord not plugged in.
Circuit breaker tripped.
Internal fuse blown.
Internal problem.
Door not fully closed.
Incorrect Q cycle.
Inoperative component.
Control not programmed properly.
Soiled oven.
Splatter shield pressing on stirrer.
Stirrer not turning.
Inside of oven soiled.
Seal on oven tray broken.
Interlocks out of adjustment.
Heating procedure incorrect.
Wattage output too low.
Air inlet obstructed.
Discharge area obstructed.
Unit operated with metal utensils.
Air filter blocked.
14
CORRECTIVE ACTION
Plug in power cord.
Reset breaker.
Call authorized service personnel.
Is unit on a dedicated circuit?
Call authorized service personnel.
Close door again, retry.
Retry Q-ing cycle.
Call authorized service personnel.
Reprogram control.
Clean oven cavity and splatter
shield.
Check splatter shield positioning.
Call authorized service personnel.
Clean as needed.
Call authorized service personnel.
Call authorized service personnel.
Check time.
Perform wattage output test.
Clean air filter.
Clear obstruction.
Remove metal.
Clean or replace air filter.