Hydraulic Specifications - Tecno-gaz PURA Istrucciones Para El Uso

4.3 HYDRAULIC SPECIFICATIONS

Flow rate with supply pressure of 3.4 bar
Maximum and minimum plumbing pressure
Conductivity value of the water supplied by PURA™
Maximum installation distance between PURA™ and
the autoclave
Salts neutralized by the resins
The graph refers to a supply of water with conductivity of 560 μS/cm
The hardness of the incoming water determines the life of the cartridge and therefore the number
of litres delivered.
40
12l/h (T= 20° and C=560 μS)
(2 to 7) bar
< 15 µS
2 m
Type organic and inorganic
Production at 20 °C and 560 µS
Pressare (bar)
ENGLISH