Switching On And Off; Temperature Regulation - AERMEC FMT 10 Manual De Uso E Instalación

USE USE
1
OFF ON
LOW MED HIGH
3

SWITCHING ON AND OFF

Move the cursor OFF-ON to switch the fan coil on or off.
For correct working, before switching the fan coil on, check that water is
circulating in the system at a suitable temperature for the working mode
you have selected.
In particular, check that, in winter functioning, the heat pump or boiler is
switched on, and in summer functioning, the chiller is switched on.
FMT10 can also be used with fan coils for sensitive-only cooling.
OFF ON
LOW MED HIGH
VENTILATION SPEED
You can manually choose from a number of ventilation speeds:
Minimum speed: LOW
Average speed: MED
Maximum speed: HIGH
8
2
WARMER
COOLER
4
WARMER
COOLER
1 - GREEN INDICATOR LIGHT
The green indicator light shown that the panel is being
powered

2 - TEMPERATURE REGULATION

Knob for setting the room temperature (10°C÷30°C)
3 - SWITCHING ON AND OFF
Allows you to switch the fan coil on or off
4 - FAN SPEED
Allows you to set the ventilation speed of the fan coil (low,
medium or high)
TEMPERATURE REGULATION
Using the knob, select the desired temperature; to increase, turn it
clockwise, and to decrease, turn anticlockwise.
The temperatures that can be set range from approximately 10°C to 30°C.
It is necessary for the water in the system to be at a suitable temperature.
WARMER
OFF ON
LOW MED HIGH
COOLER
WARMER
OFF ON
LOW MED HIGH
COOLER