Installation; Pressing Out The Ventilation Opening; Mounting The Minibar Into A Piece Of Furniture - Dometic DM 50NTE Instrucciones De Montaje

Installation

6 Installation
6.1 Notes on mounting into furniture
You can mount the minibar in four ways into furniture. Choose your favoured
alternative according to fig. 7, page 6.
Observe the following:
• The cut-out dimensions H x W x D are:
– DM50NTE D: 428 x 560 x 504 mm (16.85 x 22.05 x 19.84 in)
– DM50NTE F: 428 x 560 x (502 + d) mm (16.85 x 22.05 x (19.76 + d) in)
d is the thickness of the hotel's own decor
• The clearance between the minibar's back and the furniture wall should be
approx. 15 mm (0.59 in).
• The ventilation openings for the chosen alternative have to be produced as
shown in fig. 7, page 6.
• Air passing through the inlet air duct must not be heated by any heat sources
(heaters, direct sunlight, gas ovens etc.).
6.2

Pressing out the ventilation opening

fig. 9, page 7
➤ Produce a ventilation opening of 75 x 550 mm (2.95 x 21.65 in) in the bottom of
the furniture into which you place the minibar.
Measure the distance of 504 mm (19.84 in) from the minibar's door front
excluding any own decor.
6.3

Mounting the minibar into a piece of furniture

No in
fig. 0, page 7
1
2
➤ Fasten the minibar with the four screws ø4 x 45 mm (ø0.16 x 1.77 in) (fig. 0 1,
page 7).
➤ Insert the four plugs (fig. 0 2, page 7) into the boring.
18
Description
Screw ø4 x 45 mm (ø0.16 x 1.77 in)
Plug
DM50NTE
EN