Joerns Healthcare Oxford Ascend Manual De Instrucciones página 6

Oxford ®
Ascend
1.
Place the chassis in a clear space and apply the rear bakes. Attach the foot tray to the base
using the location holes positioned on tbe base casting.
2.
Fit the mast and boom assembly into the chassis socket.
3.
Tighten the mast assembly with the mast-locking device, which is located at the front of the
chassis.
Avoid trapping fingers. Keep fingers away from the end of the mast when inserting into the
chassis socket. Full engagement of the mast is indicated by the label on the side of the mast.
The electric leg operation will not function unless the mast is fully engaged.
6
294000.10022 Rev. C
WARNING
E n g l i s h