Safety Notes - Weller BP645 Manual Del Usuario

6. Hold the soldering iron like a pen. Press and hold
BP645 Cordless
the round buttonon top of the On/Off slide switch
Battery Powered
continuously. The iron heats up to solder melting
Soldering Tool
point in about 15 seconds.
7. To extend battery life, only press the button when
Thanks you for purchasing the BP645 battery powered
soldering.
cordless soldering tool from Weller. This is the latest in
8. Place the hot soldering iron standing upright so the
a line of both cordless and corded soldering and hot
tip does not come in contact with surrounding
air tools from Weller - the world's leading maker of
objects.
soldering products. With proper care, your BP645 tool
9. After soldering, slide the switch to the "OFF" positi-
will give you years of reliable service.
on and replace the protective cover.
BP645 is a lightweight, fast heat-up soldering iron
ideal for field service work where electricity is not rea-
dily available. The heating element coil is contained in
the tip for super-fast heat-up. Use this tool for light
duty soldering jobs where portability is necessary.

Safety Notes

Maintenance
1. Always place the soldering iron in the original
1. If it takes more than 30 seconds to reach working
holder.
temperature, install fresh batteries.
2. Remove all inflammable objects from the proximity 2. Use alkaline batteries for best results. Do not mix
old and new batteries.
of the hot soldering tool.
3. Do not change the soldering tip when hot. Use the
3. Use suitable protective clothing. Risk of burns from
tip exchanger provided to remove the tip as shown.
liquid solder.
4. The soldering tip is iron plated for long life. Do not
4. Never leave the hot soldering iron unsupervised. file the tip as filing will destory the plating.
5. Remove the batteries from the tool when not using
5. Never work on voltage-carrying parts.
for prolonged periods to prevent batteries from lea-
6. Tip is HOT! Do not touch the tip or you may get
king into the tools.
severely burned.
7. Do not immerse in water!
Weller Consumer Soldering Iron Warranty
8. Allow the tip to cool after use before storing away.
Cooper Hand Tools warrants this product will be free
9. Place the protective cover over the tip when storing
from defects in material and workmanship for a
so that the cover secures the safety slide switch in
period of two (2) years from the date of purchase. No
the "OFF" position.
warranty is made with respect to products which have
been (a) altered, modified or repaired by anyone other
Operating Instructions
than Cooper Hand Tools; (b) subject to abuse, impro-
1. To install batteries, remove the battery cover by
per use, negligence, accordance with normal practices
pinching the clips on the sides of the battery cover
or the instructions and specifications of Cooper Hand
and lifting off.
Tools;
2. Place (3) 1.5 V size AA alkaline batteries (included)
(c) used in conjunction with any product, device, com-
into the iron as illustrated and replace the cover.
ponent or system, that is either defective, the source
of a defect, or not reasonably intended to be used in
conjunction with this product.
The foregoing limited warranty is exclusive and in lieu
of all other warranties, whether expressed, implied or
statutory, including, but not limited to, any warranty of
3. Remove the protective cover from the tip.
merchantability or fitness for any particular purpose.
4. Make sure the tip is securely installed.
The obligation of Cooper Hand Tools under this limited
5. Slide the ON/OFF switch to the "ON" position.
warranty is expressly limited to repairing the product,
refunding the purchase price or replacing the product,
at the sole and absolute discretion of Cooper Hand
Tools, at no charge to Buyer.
The remedies provided for herein shall constitute the
sole recourse of Buyer againsts Cooper Hand Tools,
wheter the claim is made in tort or in contract, inclu-
ding claims based on warranty, negligence, strict lia-
bility, deceit, fraud, misrepresentation or otherwise. In
no event shall Cooper Hand Tools be liable for special,
indircet, incidental or consequential damages (regar-
less of the form of action), nor for lost profits. Cooper
Hand Tools liability for any claims or damages arising
out of or connected with the manufacture, sale, deli-
very, use, maintenance, repair or modification of this
product shakk not exceed its purchase price.
Cooper Hand Tools will, during the warranty period,
repair, replace or refund the purchase price of any
product found to be defective in accordance with this
limited warranty.Return freight prepaid with proof of
purchase to:
Cooper Tools B.V.
Phileas Foggstraat 16
7821 AK Emmen Drenthe
The Netherlands
Phone: (0591) 66 75 00
Fax: (0591) 66 75 95