Transportation And Changing Of Installation Position; Repositioning The Door; Before Calling Your After Sales Service - Electrolux EJF4850JOX Manual De Instrucciones

www.electrolux.com
TRANSPORTATION AND CHANGING OF
PART - 5.
INSTALLATION POSITION

Transportation and Changing of Installation Position

• Original package and foam may be kept for re-transportation (optionally).
• You should fasten your fridge with thick package,
bands or strong cords and follow the instructions for
transportation on the package for re-transportation.
• Remove movable parts (shelves, accessories, veg-
etable bins etc.) or fix them into the fridge against
shocks using bands during re-positioning and trans-
portation.
Carry your fridge in the upright position.

Repositioning the Door

• It is not possible to change the opening direction of your fridge door, if the door handles
on your fridge are installed from the front surface of the door.
• It is possible to change the opening direction of the door on models without any handles.
• If the door opening direction of your fridge may be changed, you should contact the
nearest Authorized Service to have the opening direction changed.
PART - 6.

BEFORE CALLING YOUR AFTER SALES SERVICE

What to do if your refrigerator does not operate;
Check that;
• There is no power ,
• The general switch in your home is disconnected ,
• The thermostat setting is on "1" position ,
• The socket is not sufficient. To check this, plug in another appliance that you know which
is working into the same socket.
What to do if your refrigerator performs poorly;
Check that;
• You have not overloaded the appliance ,
• The doors are closed perfectly ,
• There is no dust on the condenser ,
• There is enough place at the rear and side walls.
If your fridge is operating too loudly;
Normal Noises
Cracking (Ice cracking) noise:
• During automatic defrosting.
• When the appliance is cooled or warmed (due to expansion of appliance material).
Click noise: Heard when the thermostat switches the compressor on/off.
ENGLISH 16