Technical Data; Carryvac - ESAB CarryVac 2 P150 Manual De Instrucciones

© ESAB AB 2012
1 Preface
This manual is for the correct installation, use and maintenance of this product. Read it carefully
before using this product or carrying out maintenance. Replace the manual immediately if lost.
This product has been designed to meet the requirements of relevant EC directives. To maintain
this status, all installation, repair and maintenance work for this product is to be carried out by
qualified personnel using only original spare parts. Contact the nearest authorized distributor or
ESAB for advice on technical service and obtaining spare parts.
ESAB continuously improves its products' design and efficiency through modifications, and
reserves the right to do so without introducing these improvements to previously supplied
products. ESAB also reserve the right to, without previous notice, modify data and equipment as
well as operating and maintenance instructions.
2 Description
2.1 Function
See Figure 2.
1.
Handel/combined lock for the coarse separator.
2.
Coarse separator.
3.
Switch.
4.
Time delay (only units with automatic mode).
5.
AUTO ON indicates that the current supply to the electronics is operative (only units with
automatic mode).
6.
FILTER FULL (6) Indicates that the filter is full with welding fume particulate and requires
changing as soon as possible to ensure maximum suction effectiveness. Is only indicated
when the fume eliminator is in operation (only units with automatic mode).
7.
Holder for welding or welding return cable (only units with automatic mode).
8.
Exhaust.
2.2

Technical data

Table 2-1: Technical data
Dimensions
Noise level
Weight
Voltage
Power
Max. vacuum
Capacity
Filter area
Filtration efficiency
3 Using CarryVac 2
3.1 Operation
See Figure 2.
Instruction manual
See Figure 2.
75 dB(A) ISO 11201
15.8 kg (35 lb.)
120/220–240 V AC 50/60 Hz
1000 W (1.3 hp)
22 kPa (88 in. w.g.)
150 m /h (88 cfm) with 2.5 m hose.
3
5.3 m
2
99.7 %

CarryVac 2

GB
English
5