Remove Transport Lock; Set Up Mobile Version (If Available); Assembly Of The Optional Clampholder; Set Up The Safety Set - Medela Basic Instrucciones De Uso

5.2
Remove transport
lock
5.3
Set up mobile version
(if available)
5.4
Assembly of the
optional clampholder
(when using the
trolley)
5.5

Set up the Safety Set

14 |
Installation
1.
1.
2.
1.
1.
1.1
1.2
2.
1.1 Remove the red note
1.2 Remove 3 screws and
store them for later use.
1.1 Position top part of trolley
on bottom part, making
sure the tubing fits as
shown.
1.2 Connect parts with
4 screws.
2.1 Position pump on trolley.
Make sure that the front
of the pump and the
standard rail point
forward.
2.2 Connect pump with
4 screws.
2.3 Attach the cable holder
with the two screws to the
pump.
1.1 Press and hold the blue
release knob.
1.2 Attach the clampholder to
the standard rail by
releasing the blue knob.
1.1 Attach the mechanical
1.3
overflow protection to
the lid. Pull gently down-
wards to make sure it is
open / deactivated.
1.2 Attach the lid to the jar.
1.3 Close the two lid clamps.
2.1 Attach the Safety Set to
the pump.