Installation - Favero Electronics FC50H15 Manual De Uso

ENGLISH
2. I
NSTALLATION
Select the position on the wall where you want to install the scoreboard: check to make sure that the wall is
strong enough to support the weight of the scoreboard and that the dowels provided are suitable for the
type of wall and environment (e.g., possible corrosion due to dampness). If the dowels are not suitable
for the wall, replace them with appropriate ones. Consult a professional in the field .
Prepare the electrical connection as indicated in Chap. 3.
(1) Remove the metal bracket from the back of the scoreboard by unscrewing the two screws (Fig. 2.1).
1. Metallic bracket
2. Screws to remove
Fig. 2.1
(2) Measure the distance between the top two holes of the metallic bracket (Fig. 2.2).
(3) Drill the holes in the wall at the measured distance and insert the anchors (the anchors supplied need 8mm
diameter holes).
(4) Fix the metal bracket to the wall by inserting the screws through the slots indicated in Fig. 2.2.
1. Cylinder head screw 5x50mm provided in the supply
2. Slotted hole
3. SX8 anchor provided in the supply
4. Wall holes, dia. 8mm
Fig. 2.2
00304-M00-01-ML - FC50H15 Installation manual 4 / 32 F E D
AVERO LECTRONIC ESIGN