Hella 2PT 009 599-801 Instrucciones De Montaje página 8

ENGLISH
GB
Electrical connection
Page 3
Lay and connect the cables in
accordance with the connection
diagram.
According to the connection
diagram, the daytime running
lights are switched on automatically
with the ignition.
8
Installation
Page 4
Determine the installation position
and mark the fastening points.
Pre-drill using a 3 mm drill bit and
drill out to 8,5 mm.
Seal drilled metal parts with rust
protection agent.
Caution!
Daytime running lights
• are not a substitute for low beam
at dawn/dusk or during darkness.
• they shine only when the vehicle
lighting is switched off and the
ignition is switched on.
• they switch off automatically when
switching on the vehicle lighting.
1.500
mm
max.
250mm
min.
• are approved in accordance
with ECE R87.
• may be fitted in accordance
with EC Directive EC R97/28
and ECE R48.
We recommend that the
installation instructions are
carried along with the vehicle
documentation.
600mm
min.