Technical Data - Rexel CB356 Instrucciones De Funcionamiento

Getting Started
5
Comb binding
Place the plastic comb open side up on the metal teeth.
●
To open the comb, turn the comb opening knob (located at the
●
side of the machine).
Punch and then load each paper stack onto the opened comb
●
until the entire document is loaded.
To close the comb, rewind the comb opening knob and lift the
●
bound document from the metal teeth.
Binding tips:
Load the rear cover onto the open comb first, followed by the
●
internal sheets and front cover.
To edit your document, additional sheets may be included or
●
removed by placing your document (comb open side up) onto the
metal teeth and following step 5 instructions again.
For further hints and tips please visit our website:
●
www.boundtopresent.com
6
Maintenance
Please ensure the clippings tray is emptied on a regular basis. This
may prevent your machine from overloading.
CB356, CB366:
When the clippings tray is full, you will see the clear window full of
clippings. Empty the contents of the tray to continue binding.
CB356E, CB366E:
When the clippings tray is full, a yellow LED will be lit. Empty the
contents of the tray to continue binding.
Security
A security slot is fitted for use with leading makes of security leash.
E.g. Kensington Microsaver. ( )

Technical data

Technical data
Operation mode
Max. binding size
Hole pitch
Number of punch slots
Margin depth
Punching paper (80gsm)
Punching PVC plastic foils
(0.2mm)
Max. comb diameter (mm)
Binding capacity (sheets)
Net weight (kg)
Dimensions WxDxH (mm)
Voltage
CB356E and CB366E are approved to EN60950 and CE Standards
Technical data subject to change without notification
3
CB356 CB356E
manual electric
A4
US Pitch 9/6" / 14.28mm
21
fixed
max. 25
max. 3
50
450
10.45 14.49
440x450x200 440x450x170 480x450x200
230V 50Hz AC
GB
CB366 CB366E
manual electric
variable
max. 30
max. 4
11.03 14.49
480x450x170
230V 50Hz AC