POINTS FOR USING AIR CONDITIONER
WARNING
To reduce the risk of fire, electric shock, or injury to persons,
read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
NOTE: If the air conditioner is turned off, wait 3 minutes before restarting. This
allows pressure inside the compressor and equalize. Failure to follow these
instructions may be harmful to your unit.
To begin operating the air conditioner, follow these steps:
1. Set the thermostat to the highest number (coldest or cooler setting).
2. Set the selector control to the highest COOL setting.
3. Adjust the louver for comfortable air flow (see AUTO SWING).
4. Once the room has cooled, adjust the thermostat to the setting you find most
comfortable.
5. Make sure that the air flow inside and outside are not obstructed by anything.
6. This air conditioner is designed to be operated under conditions as follows:
Cooling Operation
If the unit is operated beyond the conditions specified above, it may cause a failure
of the unit.
O
Outdoor temp.:
18-43 C(T
O
Indoor temp.:
18-32 C(T
Note:
The relative humidity of home should be less
than 80%. If the unit is used in a condition with a
relative humidity over 80%, there will be condensed
water on the appearance of the unit.
3
O
21-52 C(T
Environment)
1
O
18-32 C(T
Environment)
1
Environment)
3
Environment)
3