Instructions; Application Notes - RSP ENCODER Manual De Usuario


Conservation and care instructions
• The measuring device comprises electronic and precision elements. Both the accuracy of the
measurement values as the life of the appliance depend on the correct use of it:
- Protect the device from impact, moisture, dirt, major temperature fluctuations and direct
exposure to sunlight.
- Protect the device from falling.
- Do not use in the vicinity of eletromagnéticos intensive fields and facilities away from radio
and mobile phones hold.
• Do not switch the encoder if you will not use it.
• Wait until the batteries are fully discharged to charging again.

Notes on repairs and disposal
• Do not open the device. Failure to comply with this rule will void the warranty.
• Do not repair or adjust the appliance yourself. If you do, operation is not guaranteed.
• Repairs should only be left to the customer service or authorized dealers. Before making any
claim, read the FAQ and common solutions at the end of this manual.
• Dispose of the device according to European directive on waste electrical Electrical and
Electronic (WEEE).
For more information, contact the competent local authority waste disposal.


Application notes

• To ensure that values are comparable, do the exercises always at the same time of day.
• Rest for 5 minutes before each measurement.
• Repeat the measurement should be wary of the measured values.
• Measurements by you informational purposes only. Talk of the values obtained with his
trainer.
• The encoder must not be used in conjunction with high frequency equipment.
• This appliance is designed only for the purposes described in these instructions. Therefore,
the manufacturer declines all responsibility for any damages caused by improper or incorrect
use.
26
