Instructions For Use/Warranty - Maxi-Cosi Citi CX Manual De Instrucciones

The adapters will drop into the adapter openings underneath the Dreami. You should hear a click on both sides
upon fitting.
• Check whether the Dreami is secured properly by lifting the Dreami up by the handles.
Removing the Dreami from the Maxi-Cosi Citi CX (F2)
• Hold on to the handles on both sides of the Dreami and place your thumbs on the control buttons to fasten it
on to the Maxi-Cosi Citi CX (F2-1).
• Press the buttons and lift the Dreami off the Maxi-Cosi Citi CX (F2-2).
Placing the Maxi-Cosi on the Maxi-Cosi Citi CX (G1)
• Unfold the Maxi-Cosi Citi CX and check whether it is properly locked, making sure that the adapters are well
secured.
• Place the Maxi-Cosi on the Maxi-Cosi Citi CX adapters with the foot end between the handlebars. You should
hear a click on both sides upon fitting (G1).
• Check whether the Maxi-Cosi is properly secured by lifting the Maxi-Cosi up using the carrying handle.
Removing the Maxi-Cosi from the Maxi-Cosi Citi CX (G2)
• Stand at the head of the Maxi-Cosi, hold the Maxi-Cosi on both sides, press the two control buttons
simultaneously (G2-1) and lift the Maxi-Cosi off the Maxi-Cosi Citi CX (G2-2).
Removing the adapters (H1)
• Remove the adapter by pressing the spring-loaded button (H1-1) and at the same time sliding the adapter upwards
(H2-2).
• Repeat this for the other adapter.
Placing the pushchair seat on the Maxi-Cosi Citi CX (I1-I2)
IMPORTANT!!! The seat can only be placed on a partially folded/unfolded Maxi-Cosi Citi CX, which means
that the tensioning handle should not be used at this point.
• Fold the pushchair seat in half (backrest against the seat).
• Stand at the front of the Maxi-Cosi Citi CX (swivelling wheels) and slide the plastic strips onto the rails under
the seat until you hear a click on both sides (I1).
• Unfold the backrest.
• Place the bottom of the adapter (pushchair seat) onto the spring-loaded button (I2-1). Press the spring-loaded
button whilst at the same time sliding the adapter downwards until you hear a click. See instructions for
attaching the adapter (E1).
• Repeat this on the other side.
• Next, unfold the Maxi-Cosi Citi CX completely and use the tensioning handle.
Footrest Adjuster (J1)
• You can adjust the foot rest in 2 different positions to suit the length of your child's legs (J1).
• Release both foot rest adjusters (J1-1). Higher or lower the footrest as required (J1-2) and re-lock the footrest
adjusters.
• Attention: you will also need to adjust the length of the footrest adjuster strap when adjusting the footrest (J1-3).
• When using the lowest footrest position, the strap must be used full length (use the top and bottom press studs).
• With the highest foot rest position, the strap should be at its shortest length (use the push buttons on the
bottom and in the middle).
Important!! If you do not adjust the strap to the correct length, the footrest will no longer fold up automatically.
Instructions for use
GB
9