Aux Mode; Usb Mode; Hdmi Mode - Lenco SB-080 Manual De Usuario

AUX Mode

1. After switching on the soundbar, change to AUX input mode by pressing the
'input' button on the remote control until [AU] is shown on the display.
2. Plug in the 3.5mm AUX cable to the AUX connector on the soundbar and
start playing from the connected music device.

USB Mode

The USB port can be found on the right side of the soundbar. You can use USB
memory sticks with music files in MP3 format.
1. Plug in the USB drive into the USB port.
2. The music files on the USB drive will play automatically and the display will
show [US]
3. You can use the remote control to play/pause/stop and play next/previous
track.

HDMI Mode

1. The Soundbar supports HDMI with Audio Return Channel (ARC). lf your TV
is HDMI ARC compliant, you can hear the TV audio through your soundbar
by using a single HDMI cable
2. Connect a high speed HDMI cable from the HDMI TV (ARC) connector on
the soundbar to the HDMI ARC connector on your TV. The HDMI ARC
connector on the TV might be labelled differently. (HD) will display on the
soundbar
3. On your TV, select source as HDMI (ARC) mode. For details on the
HDMI (ARC) mode, consult your TV user manual.
Optical Mode
Using an optical cable, connect the OPTICAL connector on the Soundbar to
the OPTICAL OUT connect on the TV or other device. (OP) will display on the
sounbar.
8