Dmx Linking - Chauvet DJ HURRICANE Bubble Haze Guía De Referencia Rápida

EN
Control Panel Description
Button Function
<MENU> Exits from the current menu or function
<UP> Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list and decreases the numeric value when in a function
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function
Menu Map
Mode
DMX Address
Bubble Output
Haze Volume
Blower Fan Speed
Bubble Cleaning Mode
• For the Bubble Cleaning Mode, use clean water to rinse out the bubble mechanism.
• Through the display menu, the Bubble Cleaning Mode will run for 2 minutes before reverting to
standby.
Use the Bubble Cleaning Mode after every use.

DMX Linking

The Hurricane Bubble Haze can work with a DMX controller. Instructions for connecting and configuring this product for
DMX operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from
www.chauvetdj.com.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 509.
Master/Slave Connection
The Hurricane Bubble Haze uses the DMX data connection for its Master/Slave mode. Information about configuring the
Hurricane Bubble Haze for Master/Slave operation is in the User Manual, which is available from the Chauvet website.
DMX Values
Channel Function
1 Bubble Output
2 Haze Volume
3 Blower Speed
4 Bubble Cleaning Mode
• For Continuous Output mode, set channel 2 from 011  126.
• Fluid consumption will be significantly increased during Continuous Output mode.
• For the Bubble Cleaning Mode, use clean water to rinse out the bubble mechanism.
• Through DMX, the Bubble Cleaning Mode will run indefinitely.
Use the Bubble Cleaning Mode after every use.
3
QUICK REFERENCE GUIDE
Programming Levels
Addr 1–512
oFF
b
H 0–100
F
1–3
oFF
CLE
Value Percent/Setting
000  010 Off
011  255 On
000  010 No function
011  255 Haze volume, low to high
000  010 Blower fan off
011  100 Blower fan speed low
101  200 Blower fan speed medium
201  255 Blower fan speed high
000  010 No function
011  255 Bubble Cleaning Mode
Description
Sets the DMX starting address
Bubble output off
on Bubble output on
Haze volume, low to high
0 Blower fan off
Blower fan speed, 1 (low) to 3 (high)
Bubble Cleaning Mode
on Cleaning mode on
on (bubble pump only)
off
Hurricane Bubble Haze QRG Rev. 2