Lcd Display - Suunto ADVIZOR Manual De Instrucciones

• Also known as the “Fast Cumulative” button, by pressing the [-] button in any of the main modes, except the
compass mode, the Wristop Computer will quickly access information about total vertical ascent/descent,
number of runs completed as well as maximum, minimum and average heart rate of the current or last
completed recording. In the compass mode, the [-] button locks the current bearing for 10 seconds.
• In the timing functions, this button acts as a reset or pause button.
• In the memory and logbook functions, this button backtracks through previously recorded screens.
Is located on the top left of the Wristop Computer.
• In the main mode level, pressing the [Select] button allows the user to enter into the sub modes of the
particular function or return to the main mode the user is in.
• In the main mode or sub mode, pressing and holding the [Select] button for more than 2 seconds allows the
user to enter the setup process.
• In the setup process, the [Select] button allows the user to move between settable units or values and
determine preferences.

1.4 LCD DISPLAY

The display is designed to offer maximum clarity and simplicity and is divided into six distinct viewable areas.
• The Outer Circumference encompasses the outer boundary of the LCD display.
• A Barometric Trend Indicator provides a quick reference for analyzing and collating possible conditions in
the weather.
• Field 1 displays values in either numbers or text depending on the mode or sub mode the user is in.
• Field 2 displays large numbers and/or related unit of measure within the function.
• The Mode Indicator bar displays the five main modes (functions) of the Wristop Computer (a triangle arrow
is just below indicating the mode). The fifth main mode, HRM is displayed on the Outer circumference on the
bottom right. When the one segment under “HRM” is lit, the mode is activated for viewing and selection
purposes.
• Field 3 displays either numbers and/or text.