Quadra Hybrid A & S Flashheads; Fitting / Exchanging Reflectors - Elinchrom Quadra Hybrid S/A Head 20139 Manual De Instrucciones

QUADRA HYBRID A & S FLASHHEADS
The system offers two Quadra Hybrid Heads with LED Pilotlight:
• The S Head is designed for universal photography equipped with a standard omega plug-in flashtube.
• The A Head offers a very short flash duration for action freezing photography. The new A tube is a single twin
pole plug-in flash tube also with even light distribution.
• The super efficient LED Pilotlight 20 W (equals ca. 40 W Halogen) functions only when used with the Ranger
Quadra Battery Power Pack.
• Switch on the LED-Pilotlight by pressing the touch once. The LED lights for 15 s (standard), or longer depending
which user setting is programmed. By pressing the touch again, the LED switches off.
• The new RQ Reflector range with bayonet fits only to Quadra Hybrid S & A Heads.
• Elinchrom accessories with the 12 cm standard bayonet require the new RQ EL-Adapter 26339.
QUADRA HYBRID A- & S-HEAD CHARACTERISTICS
• Compact portable Flashhead for Outdoor and Studio photography.
• Up to 400 ws maximum flash power, for the Quadra Hybrid Battery Power Pack.
• Two Head versions with a standard S flash tube and a speed A version for "Action-Freezing" imaging.
• Small and lightweight Flashhead with plug-in flash tube and LED / Daylight Pilotlight.
• Efficient power saving 20 W LED (equals ca. 60 W Halogen).
• Easy to use, new reflector mechanism with security locking.
• Two new optimised reflectors with 55° and 70° for RQ S & A Heads.
• Optional Reflector Adapter to use the wide range of EL-Reflectors.
• Detachable high quality flash cable for optimal power and flexibility in 1.5 m, 2.5 m standard, 3.5 m.
• Integrated umbrella fitting for EL-Umbrellas up to 105 cm.
FITTING REFLECTORS
1. Always switch off the unit before connecting accessories and reflectors.
2. Disconnect the flash cable from the RQ Power Pack.
3. Mount the RQ Head to a tripod and lock the security screw.
4. Place the Reflector over the RQ Head, with the Umbrella hole showing down.
5. Press the RQ Head locking knob firmly down and turn the reflector to the right until you hear the snap-in noise.
6. Please follow images below...
7. Check if the Reflector is well fitted.
8. Reconnect the flash cable to the Power Pack and switch the unit on.
EXCHANGING REFLECTORS
1. Switch the RQ Power Pack OFF and disconnect the flash cable.
2. Mount the RQ Head to a tripod and lock with the security screw.
3. Press the RQ Head locking knob firmly down and turn the reflector to the left.
4. Now pull the Reflector from the Head.
Push locking knob
User Manual
EN
5