Publicidad
Idiomas disponibles
Idiomas disponibles
5.7); will change from red to green (fig. 5.8).
11. Pull the rotation system
position; this will make it easier for you to put your child in the safety
seat (fig. 5.9 y 5.10).
CAUTION! Before each journey, make sure that the rotation system has been
anchored correctly. Please also remember that the intermediate position is
only there to help you put your child in the safety seat; do not, under any
circumstances, start your journey with the safety seat in this position.
12. Loosen the harness by following the steps in Point 3.2 (fig 5.11).
13. Place the harness in slot B, if your baby weighs between 9 and 18 kg (fig 5.12).
14. Unbuckle the harness
the harness straps so that you can put your child in the safety seat
(fig. 5.13 and 5.14).
15. Put the child in the safety seat (fig 5.15) and put the harness on him/her.
16. Join the buckles and insert them into the harness until you hear a
click; this indicates that the safety seat has been secured properly
(fig. 5.16). Adjust the harness so that the shoulder straps
same level as the child's shoulders (fig. 5.17).
17. Pull the harness adjustment belt
snugly, without being too tight (fig. 5.18).
18. Pull the rotation system
the safety seat in forward-facing direction (fig. 5.19 and 5.20).
6. INSTALLING THE SAFETY SEAT IN A FORWARD-FACING
POSITION.
GROUP 2/3 (BELT+FIT)
WARNING
1. Remove the shock-absorbing cushion (C), to do so, loosen the harness
straps
(E)
by pulling them as far out as possible whilst simultaneously
pressing the harness adjustment button
2. In Group 2/3, the buckle is not used. For this reason, place the buckle
in position A (fig. 6.2).
(K)
until the safety seat is in the intermediate
(M)
by pressing the red button and open
(G)
so that it fits your child's body
(K)
to complete the installation, positioning
Only GROUP 2/3. From approx.
4 years to 12 years (15-36 kg)
(E)
(F)
(fig. 6.1).
are at the
35
Publicidad
