Error Table - Elinchrom ELB 500 TTL UNIT Manual De Funcionamiento

ERROR TABLE

ERROR NUMBER
1
4
6
13
EN
31
BATTERY TROUBLESHOOTING
The Battery is equipped with a Smart Fault Detection System
allowing it to disconnect automatically to prevent damage to the
Li-Ion cells. If the fault cause is removed, the battery will return
to the normal mode automatically. PLEASE CONTACT YOUR
DISTRIBUTOR if it's impossible to recover from the fault or the
battery is often dispaying a fault mode.
LI-ION CHARGER TROUBLESHOOTING
NO LED's ARE LIGHTING UP: The charging process is not
possible or the charger is out of order. Please contact your local EL
distributor.
30
DESRIPTION
Capacitors over
voltage
Charge Timeout
Unstable voltage
(Charge hold error)
Battery current
fault (battery
current overtime)
Ignition voltage
error
SOLUTION
Restart after 2
min.-> Service
Restart after 2
min.-> Service
Restart after 2
min.-> Service
Restart after 2
min.-> Service
Restart after 2
min.-> Service