Maintenance - Elinchrom ELB 500 TTL UNIT Manual De Funcionamiento

MAINTENANCE

The ELB 500 TTL power pack and heads require only very little
maintenance. To ensure secure operation please check the
following points regularly before connecting the head to the power
pack:
• Ensure that the contacts of the flash head connector are not
burned or corroded.
• The flash cable should not have any marks or cuts. The high
voltages carried can be dangerous!
• Ensure that the plug-in flash tube is correctly fitted.
• Do not use water to clean dust and dirt from the head.
• Ventilation grids must be clean and free of any tape etc.
CAUTION!
Under no circumstances open any part of the equipment. The ELB
500 TTL unit is not user serviceable and contains dangerous high
voltage. In the event of difficulty contact your Elinchrom Service
partner.
REGULAR CHECK
National safety regulations require frequent safety checks of the
electrical equipment. The ELB 500 unit should be checked once
a year. This check not only guarantees safety; it also protects the
value of the unit.
EN
31