Display Explanations; Display Symbols - HoMedics BPW-200 Manual De Usario

BPW-200IB_ENGSP.qxd 10/24/05

DISPLAY EXPLANATIONS

Date/Time Indicator
Pulse Rate
11:23 AM Page 11
Systolic
Pressure
Diastolic
Pressure
11

Display Symbols:

User 1: Appears when the monitor is operated
by User 1.
User 2: Appears when the monitor is
operated by User 2.
Weak Battery Symbol: Appears when batteries
should be replaced.
Pulse Symbol: Shows the pulse rate per minute.
Irregular Heartbeat Detector: Indicates an
irregular heartbeat was detected. See page 25
for more information.
Memory Average: Displays average of last
3 readings
WHO Health Indicator: Compares blood pressure
against guidelines set by the World Health
Organization. See page 24 for more information.
If any of the following letters and numbers appear in the
area that diastolic pressure should be displayed, an error
has occurred with your reading. See Troubleshooting
section of this manual for more information.
Measurement Error: Measure again. Wrap
the cuff correctly and keep wrist steady
during measurement.
Air Circuit Abnormality: Measure again.
Pressure Exceeding 300 mmHg: Switch the unit
off to clear, then measure again.
Data Error: Remove and reload the batteries.
12