Setting Options Overview - Sherwood R-807 Instrucciones De Funcionamiento

Setting Options Overview

main menu Sub menu
AMP
1. SYS SET A.P.C.
N.S.C.
A. SETUP
SPK SET
2. SPk SET X.OVER
DISTANCE
CH.LEVEL
HDMI
3. HDmI SET
CEC
H.GAIN
PNRM
C.WIDTH
DIEMN
C.IMG
4. PARAmTR
DRC
TONE
S.DLY
LFE
5. mlT. Rm Z2
Go to Page
44 Assigns the power amplifier.
44 Automatic Power Control.
44 Sets the standby time for the network.
44 Automatically optimizes the speaker settings.
46 Sets the speaker system.
46 Sets the crossover frequency.
46 Sets the speaker distance.
46 Sets the current channel levels.
47 Sets the connected HDMI input source.
Allows input selection of the main unit to be interlocked
47
with the operation of the connected components.
47 Sets the front height channel level.
Sets to broaden the width of the front stereo image when
47
using the Dolby Pro Logic IIx Music listening mode.
Sets the center image so it may be heard only from the
47
center speaker.
Sets the sound field either towards the front or towards
47
the rear.
47 Sets the center image.
Controls the dynamic range for movie soundtracks
48 optimized for Dolby Digital, DTS, Dolby Digital Plus and
Dolby TrueHD.
48 Sets the tone (bass and treble) as desired.
Adjust the time delay of audio signals to synchronize the
48
sound with the picture.
48 Sets the front height channel level.
49 Sets to enable or disable the Room2 function.
Customizing Settings
Description
43