Replacing The Battery - Domo DO9152ST Serie Manual De Instrucciones

DO9152ST-DO9157ST
Battery light that lights
up when the battery is
almost empty
This progress bar shows how
many steps you are removed
from reaching your step target

REPLACING THE BATTERY

Use a small Philips-head screw driver to loosen the screw counterclock
wise. When the screw is removed, take a thin blade to carefully pry loose
the plate.
Afterwards you replace the empty 3V CR2025 Lithium battery by a
new one. Put the plate back in its correct place and tighten the screw by
turning clockwise.
28