Park Brake - Great Dane Scamper HG GBD10025 Manual Del Operador

If
Battery Will Not Charge
PTO Clutch Does Not Engage
Starter Turns Slowly
Machine
If
Excessive Machine Vibration
Machine Will Not Move With Engine Running
Machine Creeps With Engine Running and Motion
Control Levers in a Neutral Position

Park Brake

If
Park Brake Not Working Correctly
TROUBLESHOOTING
Check
Loose or corroded battery or ground connections.
Blown fusible link (charging circuit).
Battery cables and terminals are dirty.
Dead cell in battery.
Blown 20-amp fuse (main power circuit).
Faulty PTO switch.
Faulty PTO clutch.
Loose PTO clutch connections.
Loose or corroded battery or ground connections.
Low battery power - charge battery.
Engine oil viscosity too heavy.
Transaxle linkages failed and are engaged.
Check
Engine speed too slow.
Deck drive belts worn or damaged.
Traction drive belt worn or damaged.
Dirt or debris on drive sheaves.
Loose or damaged electric PTO or drive sheave.
Bent or damaged cutting blades.
Park brake locked.
Transmission hydraulic oil level low.
Transmission oil cold - allow engine to warm.
Traction drive belt slipping.
Transaxle free-wheel valves open.
Traction drive belt damaged or worn.
Transaxle and/or wheel motor problems. See your Great Dane
servicing dealer.
Needs shift control linkage adjustment.
Check
Brakes out of adjustment - adjust linkage.
Brake linkage or components damaged.
Troubleshooting - 29