Safety Components - exonda S32 Manual De Instrucciones

5 Your safety is important to us
Keep away from highly
flammable substances
Improper use
Mobile stand model
Wall arm model and
mounting elements
Monitoring of appliance

Children should be supervised to ensure that
they do not play with the appliance.

Risk of ignition – Flammable mousses, sprays,
gases or highly flammable materials e.g.
synthetic tulle – must not come into contact with
the heating heaters
appliance.

Before treatment with the appliance, do not
apply ointments designed to stimulate the blood
circulation or similar products, as the heat given
off by the appliance will increase the effect of
such products.

During a perm program the hair must not be
covered by a cloth, cap, film or aluminum foil.

The appliance must not be covered by towels or
similar items.

Do not treat the face or other parts of the body.

Do not treat animals.

The appliance may not be used to dry objects or
heat food.

The appliance must only be mounted using the
ST5 stand pipe for the S32/S33 and the ST5 stand
base, or the ST3 stand pipe for the S32/S33 and
the ST3 stand base.

The wall-mounted appliance may only be
mounted on the wall arm Acrobat 2000 model
WA04/75 or WA04/95. The wall arm may only be
mounted on a wall bracket model WL04 that has
been installed as described in the currently valid
installation instructions.

5.2 Safety components


If the customer leaves the treatment area of the
appliance during a treatment (except in the
treatment programs < COLOR > with model S32,
and <HIGHLIGHT> with model S33), the
temperature sensor will adjust the heating level
upwards and switch off the heating after approx.
2-3 minutes.
34
and or be used near the
GB
D
D
D
D