EN
Getting Started
Inserting SIM Card
Before inserting the SIM card, please perform the following step:
1. Make sure the alarm system is powered off.
2. IMPORTANT: Remove the (default) code permanently from the SIM card.
3. Turn off the voice mail function if it is enabled.
4. Insert the SIM card into the SIM card holder from the alarm system as shown in the
illustration below.
SIM
IMPORTANT:
In order to use and set up the alarm system, SMS texting will be used. The use of
SMS texting cost money. Consult your carrier for the costs.
Note:
GSM/3G/4G SIM cards supported.
07
X330-UM-EN-FR-ES-PT-V1.0.indd 7-8
Turning on the Control Panel
Connect the power adapter to the connector in the
bottom of the control panel. Then slide the power
switch to 'ON'.
OFF-ON
POWER
12V/0.5A
OFF-ON
POWER
12V/0.5A
OFF-ON
POWER
12V/0.5A
Note:
Please wait until the Status/Network LED flashes every 3 seconds before you start to use
it.
EN
SIM
SIM
08
2016/8/19 15:41:07