Brinly PCT-101BH Manual Del Propietário página 8

==================================================================================================
Assembly Step 3-A
1. Align the cart foot pedal (4)
through slot in drawbar (21) with
the notch in the foot pedal oriented
towards the raised tongue on
the drawbar.
See illustration.
2. While holding the foot
pedal (4) in place, flip the
drawbar (21) over.
Assembly Step 3-B
Hardware Panel 3
Begin to slide the 3/8 x 3-3/4 in. bolt (15)
through the drawbar (21).
Between the drawbar and the foot pedal (4), add one
3/8 in. keps nut (16) to the bolt (15) as illustrated.
NOTE: Foot pedal can be adjusted slightly while installing
bolt (15). This will help to align the bolt with the hole on the
other side of the drawbar.
Starred edge of the waSher needS to be facing the Spring.
English Manual
ASSEMBLY
21
21
8
4
16
15
4
16
1008577ALL-D