Pushing The Appliance Into The Installation Cavity - Thermador T36IB Serie Instrucciones De Instalación

11. Pushing the appliance into the installation cavity

m
CAUTION
Caution when pushing the appliance into the installa-
tion cavity. Do not damage the water pipe or power
cord attached to the floor.
NOTE
When the floor or the appliance is tilted in comparison
to the installation cavity adjust height adjustable wheels
before you move the appliance into the installation
cavity.
̈
Put the mains plug into the socket.
In the case of Side-by-Side appliances a separate
socket must be used for each appliance.
̈
Prevent the power cord from becoming caught.
Tie a piece of string to the middle of the power cord and
feed forwards under the appliance. When pushing in the
appliance, pull the cable forwards.
or
Using adhesive tape, stick the power cord to the floor
centrally behind the appliance approx. 15" (380 mm)
away from the rear panel of the cavity.
m
NOTE
̈
Carefully push the appliance into the cavity until the
height-adjustable wheel interlock with the anti-tip
brackets.
̈
Remove edge protection.
21