Product Specifications - KNOVA KN BTS-10N Manual De Uso

TABLE OF CONTENTS

Product specifications ......................................................... 1

Warning .............................................................................. 1
Symbols .............................................................................. 1
Power tool safety ................................................................ 2
Table saw safety ................................................................. 3
Electrical requirements and safety ..................................... 4
Preparation ......................................................................... 5
Carton contents .................................................................. 6
Know your table saw ......................................................... 7
Glossary of terms .............................................................. 8
PRODUCT SPECIFICATIONS
MOTOR
Type: Universal Hz: 60
Amps: 13 RPM (no load): 5000
Voltage: 120 Overload Protection: YES
WARNINGS
WARNING
Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains
chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. Some examples
of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other masonry products, and
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these
chemicals work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are spe-
cially designed to fiter out microscopic particles.
Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear pro-
tective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin
may promote absorption of harmful chemicals.
SYMBOLS
WARNING ICONS
Your power tool and its Instruction Manual may contain "WARNING ICONS" (a picture symbol intended to alert you to, and/or
instruct you how to avoid, a potentially hazardous condition). Understanding and heeding these symbols will help you operate
your tool better a. safer. Shown below are some of the symbols you may see.
SAFETY ALERT: Precautions that involve your safety.
PROHIBITION
WEAR EYE PROTECTION: Always wear safety
goggles or safety glasses with side shields.
WEAR RESPIRATORY AND HEARING PROTEC-
TION: Always wear respiratory and hearing protection.
READ AND UNDERTAND INSTRUCTION MANUAL:
To reduce the risk of injury, user and all bystanders
must read and understand the instruction manual before
using this product.
Assembly and adjustments ............................................... 9
Operation .......................................................................... 16
Maintenance ..................................................................... 21
Troubleshooting guide ....................................................... 22
Push stick pattern ............................................................. 23
Parts list ............................................................................ 24
Exploded view .................................................................... 25
Parts list and exploded view stand .................................... 26
Parts list and exploded view motor ................................... 27
SAW
Blade Size: 10 in.
Blade Arbor Size: 5/8 in.
Max. Cut Depth at 90°: 3 in.
KEEP HANDS AWAY FROM BLADE: Failure to keep
your hands away from the blade will result in serious
personal injury.
SUPPORT AND CLAMP WORK
DANGER: Indicates an inminently hazardous
DANGER
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous
WARNING
situation which, if not avoided, could result in dead or
serious injury.
CAUTION: Indicates a potentially hazardous
CAUTION
situation which, if not avoided, may result in minor or
moderate injury.
CAUTION: Used without the safety alert symbol indi-
CAUTION
cates a potentially hazardous situation which, if not avoided,
may result in property damage.
1
Max. Cut Depth at 45°: 2-1/2 in.
Max. Dado Cut Width: 1/2 in.
Max. Dado Blade Diameter: 6 in.