Publicidad
Idiomas disponibles
Idiomas disponibles
Electric sterilizer 6 min' express
GB
Device specification :
1. Steel heating base
2. Start button
3. Light indicator
4. Water doser
5. Heating tank
6. Stack plate
7. Accessories basket
8. Lid
Utilization precautions :
- Carefully read all the instructions before using the sterilizer.
- Before using the device for the first time, check that your electrical installation is compatible with the device's rating.
- If any defect is visible on the device, the plug or the power cable, disconnect the device and do not use it.
- Always place the sterilizer on a flat dry surface outside the reach of children. Remember that nothing replaces the watchfulness of
parents.
- Do not move the device when it is operating or when it contains hot liquid.
- Do not touch hot surfaces.
- The steel heating base becomes very hot and the steam released by the device can cause serious burns.
- Never immerse the device in water. Never immerse the power cable, the plug or the steel heating base in water or in any other liquid.
- This device must not contain any accessory inside it. Do not dismount the device.
- Do not place anything on this device.
- This device is strictly designed for household usage. It must never be used outdoors.
- If the power cable has to be replaced, it must be done by the manufacturer or his agent to avoid any danger.
- This device is not designed to be used by people (including children) who are physically, mentally, or sensorially handicapped, or
inexperienced or unknowledgable people, unless they have received from a person in charge of their safety previous instructions on
how to use the device and are using the device under this person's surveillance.
- Watch children to make sure they do not play with the device.
- When using the device, be careful because the device releases hot steam. Do not place the device on or near hot surfaces, in an oven
or close to an electric or gas stove.
- Disconnect the device during refilling, cleaning, storage and when you do not use it.
- Keep this user guide handy.
How to use your sterilizer
Before putting products in the device to sterilize them, it is important that all baby bottles, nipples and accessories be empty and be
washed and abundantly rinsed in cold water.
3
4
1. Place the sterilizer on a flat surface outside the reach of children where it cannot move while it
is being used.
2. Remove the sterilizer from the steel heating base and remove the lid.
3. Place the rinsed baby bottles with the neck openings facing downward on the stack plate provi-
ded for this purpose (the stack plate is placed inside at the bottom of the tank).
4. Place the accessories basket on the tank.
5. Place the nipples and other accessories in the accessories basket.
Technical characteristics :
Power supply
Consumption
Conforms to European standards in force
3
220/240 V ~ 50 Hz
550 W
Publicidad
