Start Up - Fagor VTP-139 Manual De Instrucciones

1.4 Start up

 Alter clearing the display case, connect it to the electrical network and put the switch on or
en I, then the switch must be lighted.
 3 minutes after switch on, the compressor led must be permanent lighted.
 At the beginning, the indicated temperature in the display will be considered like the room
temperature. The value will be go down as the equipment go along with the closed doors
until the refrigerated value.
 The refrigerated display must running until the working temperature before loading it.
CONTROL PANEL WITH SWITCH AND THERMOSTAT
COMPRESOR ENABLE
TEMPERATURE READOUT
TERMOSTAT
VC-14
VC-20
GENERAL LIGHT
SWITCH
12