Waeco PerfectView MC402 Instrucciones De Montaje página 25

MC402
– L (indicator lights left)
– R (indicator lights right)
Do not use terminal strips.
 Use a crimping tool to connect the cables.
 When connecting to cable 31 (earth), screw the cable
– to the vehicle's earth bolt with a cable lug and a gear disc or
– to the sheet-metal bodywork with a cable lug and a self-tapping screw.
Ensure that there is a good earth connection.
If you disconnect the negative terminal of the battery, all data stored in the
volatile memories will be lost.
 The following data must be set again, depending on the vehicle equip-
ment options:
– Radio code
– Vehicle clock
– Timer
– On-board computer
– Seat position
You can find instructions for making these settings in the appropriate
operating instructions.
Observe the following installation instructions:
CAUTION!
!
 Secure the parts installed in the vehicle in such a way that they
cannot become loose under any circumstances (sudden brak-
ing, accidents) and cause injuries to the occupants of the
vehicle.
 Secure any parts of the system covered by the bodywork in
such a manner that they cannot be come loose or damage other
parts and cables or impair vehicle functions (steering, pedals,
etc).
 Always follow the safety instructions of the vehicle manu-
facturer.
Some work (e.g. on retention systems such as the AIRBAG etc.)
may only be performed by qualified specialists.
EN
Safety information
25