Waeco PerfectView MC402 Instrucciones De Montaje página 27

MC402
 This reader is certified according to the laser protection class 1.
The accessible laser radiation is safe under reasonably foresee-
able conditions. Avoid looking directly into the laser beam.
Never open the housing of the device. Do not make any repairs
to the device. Contact the manufacturer (see addresses on the
back of the operating manual).
NOTICE!
I
 If you use the monitor in vehicles, the vehicle should be running
during operation to prevent the vehicle battery from discharging.
 Only insert round discs into the device.
Do not use any other shaped discs.
 Only clean the discs with a soft, dry cloth from the middle to the
outer edge. To remove dirt, use a mild cleaning agent.
 New discs may have flaking on the edges. Remove these by
carefully running the side of a ballpoint pen around the edge.
 If the interior of the vehicle becomes too hot e.g. as a result of
direct sunlight, wait until the temperature has cooled down to
the operating temperature (under 60 °C).
EN
Safety information
27