Back Panel - Linksys CM100 Guia Del Usuario

Chapter
NOTE:
not lit, the modem is still operating, but your Internet service
has been disabled by your ISP. Contact your ISP for more
information.

Back Panel

Power
power adapter.
USB
computer using a USB cable.
Ethernet
your wired computer or other Ethernet network device using
a Category 5 (or better) Ethernet network cable.
Reset
Modem's connections and restore its factory default settings.
Using an object with a small tip, such as a pen, press and hold
the button until you feel it click.
Cable
jack using the cable from your ISP. This is a round coaxial cable,
like the one that connects to the back of your cable box or
television.

 
If the DS and US LEDs are flashing and the Online LED is
The Power port connects the Cable Modem to the
The USB port connects the Cable Modem to your
The Ethernet port connects the Cable Modem to
The Reset button can be used to clear the Cable
The Cable port connects the Cable Modem to the wall
CableModemwthUSBandEthernetConnectons
Product Overview