Operating The Appliance For The First Time; Charging Batteries; Charging The Battery - Hilti VC 20-U-Y Manual De Instrucciones

6.1.1 Operating the appliance for the first
time
1. Remove the appliance from the packaging
and connect the suction hose supplied to
the hose socket.
NOTE Use the class M version for picking
up dusts with an exposure limit value of ≧
0.1 mg/m³. Fit a plastic dust bag for mineral
dust or a paper dust bag for wood chips
or shavings in the container in accordance
with the instructions.
NOTE When used to pick up harmless
dusts: Fit a plastic dust bag in the container
in accordance with the instructions (see
printed instructions).
6.1.1.1 Fitting a paper dust bag for picking
up wood chips or shavings 2
1. Open the two catches.
2. Lift the vacuum cleaner top section away
from the waste material container.
3. Push the cardboard flange of the paper
dust bag into the plastic adapter.
4. Engage the plastic adapter with the pa-
per dust bag in the holder provided in the
container.
5. Fit the vacuum cleaner top section onto
the waste material container.
6. Close the two catches.
7. Check to ensure that the vacuum cleaner
top section is fitted correctly and secured.
8. Connect the suction hose to the appliance.
6.1.1.2 Fitting the plastic dust bag
1. Open the two catches.
2. Lift the vacuum cleaner top section away
from the waste material container.
3. Fit a new plastic dust bag (see instruc-
tions printed on it) in the waste material
container.
4. Fit the vacuum cleaner top section onto
the waste material container.
5. Close the two catches.

6.2 Charging batteries

6.2.1 Battery use and care
CAUTION
This appliance is designed for use with the
specified Hilti batteries. Charging other batter-
ies is not permissible. A risk of personal injury
or fire and irreparable damage to the battery
and appliance may otherwise result. A caustic
liquid may leak from defective batteries. Avoid
contact with this liquid.
NOTE
Before inserting the battery, check that the
contacts in the charging station are clean and
free from grease.
Store the battery in a cool, dry place. Never
store the battery where it is exposed to the
heat of the sun, on a radiator or behind glass,
e.g. at a window. Batteries that have reached
the end of their life must be disposed of safely
and correctly to avoid environmental pollution.

6.2.2 Charging the battery

DANGER
Use only the specified Hilti batteries.
DANGER
Charge the batteries only in this appliance
or with a Hilti charger.
6.2.2.1 Charging a new battery for the first
time
Charge the battery fully before using it for the
first time.
6.2.2.2 Charging a previously used battery
DANGER
Charge the batteries only in this appliance
or with a Hilti charger.
Ensure that the outer surfaces of the battery
are clean and dry before inserting the battery
in the charging station.
6.2.2.3 Recharging Li-ion batteries
CAUTION
Make sure that the outer surfaces of the
battery are clean and dry before inserting it
in the charging station.
Lithium-ion battery packs are ready to use at
any time, even when only partially charged.
Charging progress is indicated by the LEDs.
en
37