8 .
7
E N
Push selection lever to the "COLD" position.
Machine descales continuously. Lever comes
back to the middle position.
10
Push selection lever to the "HOT" position. Wait
until the lever moves to the "STOP" position.
Extraction stops.
13
Pull out capsule holder. Remove rinsing tool.
Rinse capsule holder with fresh drinking water
from both sides. Reinsert capsule holder.
Empty and clean container. Rinse and clean
water tank. Afterwards refill with fresh drinking
water and insert it into machine.
This is an electronic document, It's only controlled if it's opened directly from the source-RQM
DE S C A L I N G AT L EA S T EV E RY 3 – 4 M ON TH S
8
For a better effect of the descaler, the machine
enters a waiting time of 2 minutes. The power
button blinks green during the waiting time.
11
Push selection lever to the "COLD" position.
Wait until the lever moves to the "STOP"
position. Extraction stops.
14
Clean machine with a soft damp cloth. Dry it
afterwards with a soft dry cloth. Place drip grid
on drip tray. Then insert drip tray at desired
position.
9
Empty and clean container. Rinse and clean
water tank. Use a clean food-safe brush and
washing-up liquid as needed. Afterwards
refill with fresh drinking water and insert it into
machine.
12
At the end of the rinsing cycle, power button
lights up red. Wait until power button light
turns green. Remove container. Switch off
machine.
14