Cleaning And Care - Clatronic HTD 2861 Instrucciones De Servicio

5....-05-HTD 2861
GB
1. Fully unwind the mains cable.
2. Make sure that the iron voltage (see name plate) and the mains voltage match.
The voltage can be changed from 115V to 230V by means of the voltage switch
on the bottom of the handle.
3. Fit on a nozzle. You can dry single hair locks by concentrating the flow of hot air
with the hairdressing nozzle. The diffuser is the ideal solution to dry curly hair
without losing volume.
4. Insert the plug into a duly installed 230V/50Hz protective contact socket.
5. Shift the switch on the handle to one of the desired heat/blowing levels:
Level 0:
Level 1:
Level 2:
6. After use shift the switch to position "0" and pull out the plug. Leave the device to
cool before putting it away!
• Clean the air suction opening from time to time with a fine brush.
• Clean the housing with a soft, dry cloth without additives.
This device has been tested according to all relevant current CE guidelines,
such as electromagnetic compatibility and low voltage directives, and has been
constructed in accordance with the latest safety regulations.
Subject to technical changes without prior notice!
The device supplied by our Company is covered by a 24 month guarantee starting
on the date of purchase (receipt).
During the life of the guarantee any fault of the device or its accessories *) ascriba-
ble to material or manufacturing defects will be eliminated free of charge by repai-
ring or, at our discretion, by replacing it. The guarantee services do not entail an
extension of the life of the guarantee nor do they give rise to any right to a new
guarantee!
Proof of the guarantee is provided by the proof of purchase. Without proof of
purchase no free replacement or repair will be carried out.
If you wish to make a claim under the guarantee please return the entire machine
in the original packaging to your dealer together with the receipt.
*) Damage to accessories does not mean automatic free replacement of the whole
machine. In such cases please contact our hotline. Broken glass or breakage of
plastic parts are always subject to a charge.
24
05.03.2004
Commissioning
off
medium airflow and medium temperature
strong airflow and high temperature

Cleaning and care

Guarantee
9:05 Uhr Seite 24