Conexión De Módulo Bus-Lx - DMP XR200 Guia De Instalacion

25.9 Conexión de módulo Bus-LX™
LX-Bus Expansion
Interface Card
DMP Models 462N, 462P,
472, or 481
Each LX-Bus Module must
have its own independent
address ranging from 00 to
99. A Supervisory zone must
S
S
be programmed into the
S
XR200 to properly supervise
S
each module.
S
= Supervised Circuit
XR200 Guía de Instalación
DIAGRAMAS DEL SISTEMA
Bell Relay
Address
Supervisory
Address
S
S
S
S
Open Collector
Annunciator Outputs
S
S
S
S
Model 716 Output
Expander Module
7m at 12 VDC
Model 867
12 or 24 VDC
Notification Module
Bell Power
Normal/Silence Switch
Supply
Ground Fault LED
+ -
Bell Trouble LED
1 Bell In +
2 Bell In -
3 Bell Out +
4 Bell Out -
5 Bell Trouble
6 Bell Trouble
7 PWR Mon.
8 Mon. RTN
TENS ONES
Bell Ring Style
TENS ONES Power Supply Monitor LED
Data LED
Red
Yellow
Green
LX-Bus™ Wiring
Optional LED wiring 50mA at
50 VDC resistive
Form C Contacts
Typical
Relay 4
Normally Closed
Common
Normally Open
Optional LED wiring 50mA at
50 VDC resistive
Model 717 Graphic
Annunciator
Module
10m at 12 VDC
10K EOL Resistor
DMP Model 308
UL Listed,
Polarized
12 or 24 VDC
Notification
Devices
Connect to panel
Supervisory zone
To additional LX-Bus Modules
Black
Digital Monitoring Products
33