Playback Mode; Option Setup; Volume Control - Denon AVR-391 Manual Del Usuario

Source Level
• This function corrects the playback level of the selected input source's audio input.
• Make this setting if there are differences in the input volume levels between the different sources.
–12dB – +12dB (0dB)
The analog input level and digital input level can be adjusted independently for input sources for
which "OPT" or "COAX" is assigned at "Input Assign" (vpage 31).

Playback Mode

This item can be set when the input source is "DOCK".
Setting items
Repeat All : All fi les are played repeatedly.
Make settings for repeat One : A fi le being played is played repeatedly.
mode. OFF : Repeat playback mode is canceled.
n When DENON control dock for iPod ASD-11R is connected
Shuffl e
Make settings for shuffl e Songs : All fi les are played in shuffl e playback mode.
mode. Albums : Files in the album are played in shuffl e playback mode.
OFF : Shuffl e playback mode is canceled.
n When DENON control dock for iPod ASD-3N, ASD-3W, ASD-51N
or ASD-51W is connected
ON : Shuffl e playback mode is enabled.
OFF : Shuffl e playback mode is canceled.
Remote control operation
buttons
Default settings are underlined.
Setting details
Setting details
Move the cursor
(Up/Down/Left/Right)
Input Setup

Option Setup

Make various option settings.

Volume Control

Sets the volume setting.
Setting items
Disp. (Volume Display)
Set how volume is
displayed.
Limit (Volume Limit)
Make a setting for
maximum volume.
P.On (Power On Level)
Defi ne the volume setting
that is active when the
power is turned on.
Mute (Mute Level)
Set the amount of
attenuation when muting
is on.
Confi rm the setting
Default settings are underlined.
Setting details
Relative : Display ---dB (Min), in the range –80.5 dB – 18 dB.
Absolute : Display in the range 0 (Min) – 99.
The "Volume Display" setting is applied also to the "Volume Limit"
and "Power On Level" display method.
OFF : Do not set a maximum volume.
–20dB (61) / –10dB (71) / 0dB (81)
If "Disp." is set to "Absolute", the value in ( ) is displayed.
Last : Use the memorized setting from the last session.
– – – (0) : Always use the muting on condition when power is turned on.
–80dB – +18dB (1 – 99) : The volume is adjusted to the set level.
Full : The sound is muted entirely.
–40dB : The sound is attenuated by 40 dB down.
–20dB : The sound is attenuated by 20 dB down.
Return to previous menu
ENGLISH
33