Upholstery Fabric; Calf Strap Mount - Ki Mobility Ethos Manual De Instrucciones

V. SET UP & USE OF YOUR WHEELCHAIR
K. Upholstery Fabric
1. You must immediately replace seat and back upholstery that has worn through and shows
signs of failing. If you fail to do so, the seat or back may fail.
2. The seat sling material will weaken over time. Look for fraying, thin spots or stretching of
fabrics especially at edges and seams. This should be done weekly.
3. The repeated action of transferring to your wheelchair will weaken sling material and result in
the need to inspect and replace the seat more often.
4. Be aware that laundering or excess moisture will reduce flame retardation of the fabric.
5. Contact your wheelchair provider if you have concerns about your seat or back, or feel it
needs to be replaced.
L. Calf Strap Mount
Adjusting Height of the Calf Strap Mount
1. Loosen the four screws (Fig. 15:A) on the calf strap mount with a Philips screwdriver.
2. Move the calf strap mount up or down to desired height and secure in place by retightening
the four screws (Fig. 15:A) with a Philips screwdriver.
Fig. 15
A
A
A
A
21