Changing Elastomers - Ki Mobility Ethos Manual De Instrucciones

V. SET UP & USE OF YOUR WHEELCHAIR
N. Changing Elastomers
Included with your chair are elastomers in different densities from what was configured on chair at
time of order. These have been provided to allow the ride experience to be optimized based on rider
preference. For additional information on elastomer selection and tailoring your ride experience,
please visit the Ethos product page at www.kimobility.com.
Elastomers can be changed or reconfigured. Follow the instructions below to complete this
procedure. A chart is included in these instructions to help guide the user to the correct elastomers
for their needs.
1. Loosen the four seat frame clamp bolts (
frame can be removed from the base frame.
2. Remove the seat frame clamps by removing bolt (Fig. 19:A), washer (Fig. 19:B) and nut (Fig.
19:C) from each clamp using a 4mm Allen wrench and a 10mm wrench. When the clamps
come off, remove the two washers (Fig. 19:D) and insert (Fig. 19:F) on the elastomer (Fig.
19:E).
Fig. 19
A
Fig. 18
A
A
C
B
Fig. 18:
A) with a 5mm Allen wrench until the seat
23
A
A
E
F
D
D