Aqua Medic EcoDrift x.3 Serie Manual De Instrucciones página 18

Fig. 18: Settings via time buttons
Click „SAVE" to save the settings.
Click "DELETE" to delete the actual planned period.
Once set, go back to the homepage and click the timer icon to enter the timer mode. In this mode, the "master"
pump can be programmed with time control and manual functions; the settings are the same as previously
described under timer mode and manual mode.
Fig. 19: To activate a program that has been created, the PROGRAM button has to be briefly touched. The
display then changes to the created program.
4.3. Linkage Mode
In the linkage mode, at least two pumps are required. Two variants are possible in this setting mode.In master-
slave operation, a program is created for the pump defined as the master, all other pumps are declared as
slaves. The same program runs on all pumps at the same time. The setting options for the "MASTER" pump are
the same as previously described under Manual mode or Timer mode.
Fig. 20: In this menu, it can be determined whether a pump works as master or slave. Only one pump can work
in master mode. Several "MASTER" pumps in the same area lead to unwanted interactions.
18