Troubleshooting - Bell CONSOLE 200 Manual Del Usuario

PROBLEM POSSIBLE CAUSE
No speedometer Possible interference from electrical sources
display and/or no
Improper magnet/sensor alignment
data reading
Poor battery contact or low/dead battery
Slow display Temperature outside of operational
response limits (0-60°C or 32-140°F)
Display shows Poor battery contact or low/dead battery
irregular features
Black display Temperature too hot or display exposed
to sunlight too long
Computer damaged or dropped
No trip distance Improper sensor/magnet alignment
reading
Wheel flex creating too much space
Speed function shuts
between sensor and magnet.
off after reaching a
certain speed

TROUBLESHOOTING

RECOMMENDED ACTION
Move computer to different area
Ensure speedometer sensor and magnet are
properly installed and aligned (STEP 5)
Replace Battery
Only use computer when temperature is
within operational limits
Replace battery
Only use computer when temperature is within
operational limits. Remove from sunlight
Computer is broken
Ensure proper alignment
Check sensor and magnet for tightness.
Reduce space between sensor and magnet
slightly (<3mm).